清华同方电脑系统出现dep_清华同方开机出现checking media
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'D:\Program Files\AHEADxp\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 2003-6-17 15:25:04
Nero版本： 6.0.0.11
刻录机： <LITE-ON LTR-40125S> 版本: ZS0R - HA 2 TA 2 - 6.0.0.11
适配卡驱动程序： <nvatabus> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <LITEON CD-ROM LTN483 >版本: BL1F - HA 0 TA 1 - 6.0.0.11
适配卡驱动程序： <atapi> HA 0
=== Scsi-Device-Map ===
CdRomPeripheral : LITEON CD-ROM LTN483 atapi Port 0 ID 1 DMA: Off
DiskPeripheral : Maxtor 91021U2 atapi Port 1 ID 1 DMA: On
DiskPeripheral : WDC WD1200JB-00CRA0 nvatabus Port 2 ID 0 DMA: Off
DiskPeripheral : ST340810A nvatabus Port 2 ID 1 DMA: Off
CdRomPeripheral : LITE-ON LTR-40125S nvatabus Port 2 ID 2 DMA: Off
CdRomPeripheral : IDE DVD-ROM 16X nvatabus Port 2 ID 3 DMA: Off
CdRomPeripheral : Generic STEALTH DVD st3wolf Port 3 ID 0 DMA: Off
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 1279MB (1310196kB)
Free physical memory: 753MB (771944kB)
Memory in use : 41 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
31.3.2005
CD-ROM (ISO)
22:43:48 #1 Text 0 File Isodoc.cpp, Line 5771
Iso document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : TRUE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : Multibyte
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
22:43:49 #2 Phase 90 File dlgbrnst.cpp, Line 1843
已激活缓存欠载保护
22:43:49 #3 Text 0 File Reader.cpp, Line 118
Reader running
22:43:49 #4 Text 0 File Writer.cpp, Line 127
Writer LITE-ON LTR-40125S running
22:43:49 #5 ISO9660GEN -11 File geniso.cpp, Line 3854
First writeable address = 0 (0x00000000)
22:43:49 #6 Text 0 File Burncd.cpp, Line 3173
Turn on 轨道一次刻录, using CD-R/RW media
22:43:50 #7 Text 0 File DlgWaitCD.cpp, Line 228
Last possible write address on media: 359844 (79:59.69)
Last address to be written: 356949 (79:21.24)
22:43:50 #8 Text 0 File DlgWaitCD.cpp, Line 233
Write in overburning mode: FALSE
22:43:50 #9 Text 0 File DlgWaitCD.cpp, Line 1722
Recorder: LITE-ON LTR-40125S;
CDR code: 00 15 17; OSJ entry from: Ritek Co.
ATIP Data:
Special Info [hex] 1: C0 00 90, 2: 61 0F 11 (LI :15.17), 3: 4F 3B 46 (LO 79:59.70)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)
22:43:50 #10 Text 0 File ThreadedTransferInterface.cpp, Line 768
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 356950 (356950) = #356950/79:19.25
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 356948 blocks [LITE-ON LTR-40125S ]
--------------------------------------------------------------
22:43:50 #11 Text 0 File ThreadedTransferInterface.cpp, Line 937
Prepare recorder [LITE-ON LTR-40125S ] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 731340800, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
356950 | lead-out | 1 | 0x00 | 0x41
22:43:50 #12 Text 0 File ThreadedTransferInterface.cpp, Line 964
Removed 2 run-out blocks from end of track 1.
22:43:50 #13 Phase 24 File dlgbrnst.cpp, Line 1843
文件暂存过程开始
22:43:50 #14 Phase 25 File dlgbrnst.cpp, Line 1843
文件暂存过程完成
22:43:50 #15 Phase 28 File dlgbrnst.cpp, Line 1843
速度检测开始
22:43:51 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2130
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
22:44:13 #17 Text 0 File ThreadedTransfer.cpp, Line 227
all writers idle, stopping conversion
22:44:13 #18 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
22:44:13 #19 Phase 29 File dlgbrnst.cpp, Line 1793
速度检测已完成：662.2x (99,330 KB/s)
22:44:13 #20 Phase 32 File dlgbrnst.cpp, Line 1843
以32x (4,800 KB/s)的速度开始仿真刻录
22:44:13 #21 Text 0 File ThreadedTransferInterface.cpp, Line 2130
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
22:44:13 #22 Text 0 File Mmc.cpp, Line 18878
Set BUFE: supported -> ON , SMART-BURN : ON
22:47:09 #23 Text 0 File ThreadedTransfer.cpp, Line 227
all writers idle, stopping conversion
22:47:09 #24 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
22:47:14 #25 Phase 33 File dlgbrnst.cpp, Line 1843
以32x (4,800 KB/s)的速度仿真刻录完毕
22:47:15 #26 Phase 36 File dlgbrnst.cpp, Line 1843
以32x (4,800 KB/s)的速度开始刻录
22:47:16 #27 Text 0 File ThreadedTransferInterface.cpp, Line 2130
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
22:47:16 #28 Text 0 File Mmc.cpp, Line 18878
Set BUFE: supported -> ON , SMART-BURN : ON
22:49:49 #29 SCSI -1135 File Cdrdrv.cpp, Line 1415
SCSI Exec, HA 2, TA 2, LUN 0, buffer 0x03960000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x01 0xE0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
22:49:49 #30 CDR -1135 File Writer.cpp, Line 335
写错误
22:49:49 #31 Text 0 File ThreadedTransfer.cpp, Line 227
all writers idle, stopping conversion
22:49:49 #32 Text 0 File ThreadedTransfer.cpp, Line 221
conversion idle, stopping reader
22:49:49 #33 CDR -201 File WriterStatus.cpp, Line 193
写入状态无效
22:49:49 #34 TRANER -18 File WriterStatus.cpp, Line 193
无法执行结束轨道
22:49:49 #35 Text 0 File Mmc.cpp, Line 13885
<LITE-ON LTR-40125S > start Close Session
22:49:49 #36 SCSI -1176 File Cdrdrv.cpp, Line 1205
SCSI Exec, HA 2, TA 2, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x03
22:49:49 #37 CDR -1176 File WriterStatus.cpp, Line 232
结束区段错误
22:49:49 #38 TRANER -19 File WriterStatus.cpp, Line 232
无法进行结束区段的动作
22:49:49 #39 Text 0 File WriterStatus.cpp, Line 241
falling back to disc fixation
22:49:49 #40 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
22:49:49 #41 Phase 38 File dlgbrnst.cpp, Line 1843
以32x (4,800 KB/s)的速度刻录失败
Existing drivers:
File 'Drivers\nvatabus.sys': Ver=5.10.2600.0446 built by: WinDDK, size=79360 bytes, created 2004-6-3 10:40:46 (Adapter driver for rec)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 2004-8-3 22:59:44 (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
K8闪龙3200+，集成的6100显卡，512MB内存（集成显卡共享了64MB内存，实际上就还剩下512-64=448MB）
很明显是内存不够了。
系统垃圾多也有可能，但内存是绝对不够的，现在一个网页只要和flash广告多一些就是数十MB
OMG，优化大师那测试工具简直就是胡扯。
声明：本站所有文章资源内容，如无特殊说明或标注，均为采集网络资源。如若本站内容侵犯了原著者的合法权益，可联系本站删除。
